Lenovo ThinkPad 320 (English) User Guide - Page 99

If you install a memory module in only one of the two memory slots, install it in the under slot.

Get Lenovo ThinkPad 320 PDF manuals and user guides View all Lenovo ThinkPad 320 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 99 highlights

5. If two memory modules are already in the memory slots, press out on the latches on both edges of the socket at the same time 1 , and then remove a memory module 2 to make room for the new one. Be sure to save it for future use. 6. Find the notch on the contact edge side of the memory module you are installing. Attention: To avoid damaging the memory module, do not touch its contact edge. 7. With the notched end of the memory module toward the contact edge side of the socket, insert the memory module 1 into the socket at an angle of about 20 degrees; then press it in firmly 2 . Note: If you install a memory module in only one of the two memory slots, install it in the under slot. 8. Pivot the memory module downward until it snaps into place. 9. Make sure that the memory module is firmly fixed in the slot and cannot be moved easily. 10. Attach the cover 1 , pivot it downwards, and then tighten the three screws 2 . Chapter 6. Replacing devices 83

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
5. If two memory modules are already in the memory slots, press out on the latches on both edges of
the socket at the same time
1
, and then remove a memory module
2
to make room for the new
one. Be sure to save it for future use.
6. Find the notch on the contact edge side of the memory module you are installing.
Attention:
To avoid damaging the memory module, do not touch its contact edge.
7. With the notched end of the memory module toward the contact edge side of the socket, insert the
memory module
1
into the socket at an angle of about 20 degrees; then press it in firmly
2
.
Note:
If you install a memory module in only one of the two memory slots, install it in the under slot.
8. Pivot the memory module downward until it snaps into place.
9. Make sure that the memory module is firmly fixed in the slot and cannot be moved easily.
10. Attach the cover
1
, pivot it downwards, and then tighten the three screws
2
.
Chapter 6
.
Replacing devices
83