Lenovo ThinkPad 600E User's Reference Guide for TP 600 - Page 130

For OS/2 Warp, System Setup, Hardware Manager, Properties, No Hardware, Detection, Utilities, Settings

Get Lenovo ThinkPad 600E PDF manuals and user guides View all Lenovo ThinkPad 600E manuals
Add to My Manuals
Save this manual to your list of manuals

Page 130 highlights

Title: C79EGMST CreationDate: 02/10/98 09:24:42 Hints, Tips, and Limitations For OS/2 Warp: If you have formatted your drive using high-performance file system (HPFS) and your system has more than 64 MB memory installed, hibernation is not supported. If the COM port does not work even if you have set it up correctly with the ThinkPad Configuration program, do as follows: 1. Open System Setup. 2. Select Hardware Manager. 3. Select a folder from the menu. 4. Select Properties. 5. In the default pull-down menu, select No Hardware Detection. If it has already been selected, change the setting. 6. Open the ThinkPad Configuration program. 7. Set the COM port as desired. 8. Restart the system. If you receive incoming faxes or mail under OS/2, you must set the modem settings in the fax application to one of the following: - Hardware FIFO enabled - Hardware Flow Control on - UART 16550A modem In OS/2 FaxWorks for example, select Utilities, Settings, Modem Type, and Use HW FIFO (16550A). If you do not set your modem to one of these settings, you will not be able to receive an incoming fax or an incoming call in suspend mode. For Windows NT: For Windows NT 4.0, hibernation is not supported if the drive is formatted by NTFS. For more information, refer to the following Web site: http://www.pc.ibm.com/thinkpad 112 IBM ThinkPad 600 User's Reference

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
Hints, Tips, and Limitations
For OS/2 Warp:
If you have formatted your drive using high-performance file
system (HPFS) and your system has more than 64 MB memory
installed, hibernation is not supported.
If the COM port does not work even if you have set it up
correctly with the ThinkPad Configuration program, do as
follows:
1.
Open
System Setup
.
2.
Select
Hardware Manager
.
3.
Select a folder from the menu.
4.
Select
Properties
.
5.
In the default pull-down menu, select
No Hardware
Detection
.
If it has already been selected, change the
setting.
6.
Open the ThinkPad Configuration program.
7.
Set the COM port as desired.
8.
Restart the system.
If you receive incoming faxes or mail under OS/2, you must set
the modem settings in the fax application to one of the following:
–
Hardware FIFO enabled
–
Hardware Flow Control on
–
UART 16550A modem
In OS/2 FaxWorks for example, select
Utilities
,
Settings
,
Modem Type
, and
Use HW FIFO (16550A)
.
If you do not set your modem to one of these settings, you will
not be able to receive an incoming fax or an incoming call in
suspend mode.
For Windows NT:
For Windows NT 4.0, hibernation is not supported if the drive is
formatted by NTFS.
For more information, refer to the following Web site:
112
IBM ThinkPad 600 User's Reference
Title: C79EGMST CreationDate: 02/10/98 09:24:42