Lenovo ThinkPad 600E User's Reference Guide for TP 600 - Page 156
A Printer Problem, Problem, Action, MIDI Port, Enable, Parallel Port
View all Lenovo ThinkPad 600E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
Title: C79EGMST CreationDate: 02/10/98 09:24:42 Troubleshooting Charts Problem The MIDI port of the port replicator does not work. Action To enable the MIDI port of the port replicator, use the ThinkPad Configuration program. Make sure that the MIDI port is enabled by doing the following: 1. Start the ThinkPad Configuration program. 2. Click on MIDI Port. 3. Confirm that the MIDI port is enabled. If not, click on Enable; then click on OK. 4. Close the ThinkPad Configuration program and restart the computer. Note: When you restart the computer, you might need to install the MIDI driver. Follow the instructions on the screen and install the device driver for your computer's operating system. A Printer Problem Problem The printer does not work. Action Make sure that: The parallel port is enabled. 1. Start the ThinkPad Configuration program. 2. Click on Parallel Port ( ). 3. Select Enable. 4. Click on OK. The printer is turned on and ready to print. The printer signal cable is connected to the correct connector of your computer. If these items are correct and the printer still does not work, run the tests described in the printer manual. If the tests show that the printer is OK, have the computer serviced. 138 IBM ThinkPad 600 User's Reference