Lenovo ThinkPad 600E User's Reference Guide for TP 600 - Page 136

Title: C79EGMST CreationDate: 02/10/98 09:24:42 Troubleshooting Charts Error Codes or Messages Note: In the charts, x can be any character. Message I9990301 I9990302 I9990305 (Incorrect connection of the hard disk drive might cause these error codes to appear.) I99xxxxx (except the above I999030x errors) 111 (docking station error) 16x or 17x (undefined date or configuration error) 174 (device configuration error) Action Your computer can't find the startup drive. Do the following: 1. Turn off the computer. 2. Press and hold F1; then turn on the computer to start Easy-Setup. Hold F1 until the Easy-Setup menu appears. 3. Select the Start up icon. 4. Select Power-On or Network. If you are unable to set the startup sequence, have the computer serviced. 5. Check the devices in the startup sequence box. Is the default drive listed in the startup sequence box? Yes Exit this window, and turn off the computer. No Select the Reset icon. 6. Is an operating system installed? Yes Go to step 8. No Install the operating system in your computer. 7. After you install the operating system, turn off the computer. 8. Turn on the computer. If the same message appears, have the computer serviced. Have the computer serviced. If you are using a port replicator or a docking station, disconnect it; then reconnect it. If you still have a problem, refer to the manual shipped with your port replicator or docking station. Follow the instructions on the screen. Make sure that the hard disk drive is connected correctly. If the problem persists, have the computer serviced. 118 IBM ThinkPad 600 User's Reference