Lenovo ThinkServer RD240 (English) Installation and User Guide - Page 64
What to do next, For one mini SAS signal cable, connect the other end to the mini SAS signal connector
View all Lenovo ThinkServer RD240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Figure 44. Installing the RAID controller into the PCI card slot 1 on the riser card assembly Note: There are three PCI card slots on the riser card assembly as shown in the illustration. The PCI card slot 1 2 is for RAID cards only. For more information about the PCI card slots, see "Installing a PCI card" on page 39. 8. Install the riser card assembly with the RAID controller into an appropriate PCI card slot on the system board. 9. Connect the other end of the two 400 mm (15.75 inches) mini SAS signal cables to the backplane of your server. Figure 45. Mini SAS signal connectors on the backplane a. For one mini SAS signal cable, connect the other end to the mini SAS signal connector 2 on the backplane. b. For the other SAS signal cable, connect the other end to the mini SAS signal connector 1 on the backplane. What to do next: • To work with another piece of hardware, go to the appropriate section. • To complete the installation, go to "Completing the parts replacement" on page 71. 52 ThinkServer User Guide