Lexmark C752 Quick Reference Pages - Page 36
Clearing fuser jams, Clearing image transfer unit jams, Clearing finisher jams (Areas 1–6)
View all Lexmark C752 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Clearing fuser jams 1 Clear the paper path. If the jam error message persists, go on to step 2. 2 Open both the upper right and the lower right access doors (Areas K and L). Clearing jams guide Page 6 of 6 6 Lift up the fuser roller cover and remove the jam. Caution: The fuser assembly may be hot. Let it cool before continuing. 3 Pull down the latches. They slide toward the center to release the fuser. 7 Close the fuser roller cover. 8 Snap the housing back onto the fuser. 9 Insert the fuser back into the printer. 10 Slide the latches out, and then pull up to refasten them. 11 Close the doors. Clearing image transfer unit jams Refer to the User's Reference located on the publications CD for information about clearing this type of jam. Clearing finisher jams (Areas 1-6) Refer to the Finisher Setup & User's Guide for instructions on clearing finisher jams. 4 Pull the fuser out of the printer, and set it on a clean, flat surface. 5 Unsnap the housing and set it aside. If you still need help 1 Turn the printer off and then back on. 2 Contact your administrator or Help desk if you need more assistance.