Lexmark C752 Quick Reference Pages - Page 6

Connection guide Page 5 of 14 Using Windows 98 with a USB or parallel cable You must install both a USB port driver and an enhanced custom print driver. Note: Depending on the software and printers already installed on your computer, your screens may vary from those in the instructions. When the Add New Hardware Wizard screen appears: 1 Insert the drivers CD, and then click Next. If the CD auto launches, exit the CD. 2 Select Search for the best driver for your device (recommended), and then click Next. 3 Select only CD-ROM drive, and then click Next. 4 After the wizard finds the USB port driver, click Next. 5 After the USB port driver is installed, click Finish. 6 Click Next. 7 Select Search for the best driver (Recommended), and then click Next. 8 Select Specify a location. 9 Browse to the location of the printer driver on the drivers CD: D:\Drivers\WIN_9X\ 10 Click OK. 11 After the printer driver is found, click Next. 12 Use the default printer name or type a unique name for your printer, and then click Next. 13 Select Yes to print a test page, and then click Finish. All the necessary files are installed on your computer. 14 After the test page prints, click Yes to close the message window. 15 Click Finish to complete the installation. You are now ready to print. Using Windows NT with a parallel cable The easiest way to install a driver is to use the drivers CD that shipped with your printer. Note: USB support is not available for Windows NT operating systems. 1 Insert the drivers CD. 2 Click Install Printer and Software. Note: You need administrative access in order to install printer drivers on your computer. 3 Click Printer. 4 Click Agree to accept the license agreement. 5 Select Quick Install and then click Next. 6 Select the port you want to use, and then select the printer you are installing. 7 Click Finish to complete the installation. You are now ready to print.