Lexmark CS331 Users Guide PDF - Page 30
Deactivating the Wi-Fi network, Checking the printer connectivity, Connecting using Wi, Fi Direct
View all Lexmark CS331 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Set up, install, and configure 30 For non‑touch‑screen printer models, press to navigate through the settings. Connecting using Wi‑Fi Direct 1 From the mobile device, go to the settings menu. 2 Enable Wi‑Fi, and then tap Wi‑Fi Direct. 3 Select the printer SSID. 4 Confirm the connection on the printer control panel. Connecting using Wi‑Fi 1 From the mobile device, go to the settings menu. 2 Tap Wi‑Fi, and then select the printer SSID. Note: The string DIRECT-xy (where x and y are two random characters) is added before the SSID. 3 Enter the PSK. Note: The PSK is the password. Notes: • You can change the SSID on the control panel. Navigate to: Settings > Network/Ports > Wi‑Fi Direct > SSID. • You can also change the PSK on the control panel. Navigate to: Settings > Network/Ports > Wi‑Fi Direct > Set PSK. Deactivating the Wi‑Fi network 1 From the printer control panel, navigate to: Settings > Network/Ports > Network Overview > Active Adapter > Standard Network For non-touch-screen printer models, press 2 Follow the instructions on the display. to navigate through the settings. Checking the printer connectivity 1 Print the Network Setup Page. From the control panel, navigate to: Settings > Reports > Network > Network Setup Page For non-touch-screen printer models, press to navigate through the settings. 2 Check the first section of the page and confirm that the status is connected. If the status is not connected, then the LAN drop may be inactive or the network cable may be unplugged or malfunctioning. Contact your administrator for assistance.