Lexmark CS331 Users Guide PDF - Page 53
Image, Auto CR after LF, Tray Renumber, Print Timeout, Auto Fit, Invert
View all Lexmark CS331 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Use printer menus 53 Menu item Description Auto CR after LF Off* On Set the printer to perform a carriage return after a line feed control command. Note: Carriage return is a mechanism that commands the printer to move the position of the cursor to the first position on the same line. Auto LF after CR Off* On Set the printer to perform a line feed after a carriage return control command. Tray Renumber Assign Tray [x] Off* None 0-201 Assign Manual Paper Off* None 0-201 Assign Manual Envelope Off* None 0-201 Configure the printer to work with print drivers or applications that use different source assignments for the paper source. Tray Renumber View Factory Defaults Show the factory default setting assigned for each paper source. Tray Renumber Restore Defaults Return all tray assignments to factory default values. Print Timeout Disabled Enabled* [90] Set the printer to end a print job after it has been idle for the specified amount of time in seconds. Note: Print Timeout Time appears only in some printer models. Print Timeout Time 1-255 (90*) Note: An asterisk (*) next to a value indicates the factory default setting. Image Menu item Description Auto Fit On Off* Select the best available paper size and orientation setting for an image. Note: When set to On, this menu item overrides the scaling and orientation settings for the image. Invert Off* On Invert bitonal monochrome images. Note: This menu item does not apply to GIF or JPEG image formats. Note: An asterisk (*) next to a value indicates the factory default setting.