Lexmark E210 Online Information - Page 101
Curl or wave, Wrinkles or creases, Back of printouts dirty, Black s
UPC - 734646229807
View all Lexmark E210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
AaBbCc AaBbCc Solving Print Quality Problems AaBbCc AAAAaaPaarBBBBobbbbblCCeCCmcccc CAAAAuaaraalBBBoBbbrbbwCCCCaccccve AaBbCc Solution AaBbCc AaBbCc • Check the type and quality. Both high tempAeraaBturbeCancd humidity will cause curl. See "Print Media SApaecBifibcaCtiocns" on page A.3. AaBbCc • Turn over the stack of print media in the input tray. Also try rotating the print media 180° in the input tray. • Push the output lever and try printing to the face up output slot. Wrinkles or creases • Make sure the print media is loaded properly. • Check the type and quality of print media. See "Print Media Specifications" on page A.3. • Push the output lever down and try printing to the face up output slot. • Turn over the stack of print media in the input tray. Also try rotating the print media 180° in the feeder. Back of printouts dirty aBbCc aBbCc aBbCc aBbCc aBbCc Black pages • The paper path may be dirty. See "Cleaning the Inside" on page 6.6. • Check to see if the toner is leaking from the print cartridge. Clean inside the printer. See "Cleaning the Inside" on page 6.6. AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc • The print cartridge may not be installed properly. Remove the cartridge and reinsert it. • The print cartridge may be defective and need replacing. Install a new print cartridge. • The printer may require repairs. Contact a service representative. 7.16 TROUBLESHOOTING