Lexmark E210 Online Information - Page 123

Linux Driver Installation 2 Install the Ghostscript. Note: Ghostscript may already be installed in your Linux machine. To support the Lexmark printer GDI, you must update the ghostscript. If you are not sure whether the ghostscript is already installed in your machine, use the command: >rpm -q ghostscript (you can see the version of the ghostscript currently installed in your machine by this command.) 3 Install setup script. To update the ghostscript: a Change to the directory where the ghostscript is in by typing in: >cd/mnt/cdrom/linux/gs5.XX (where /mnt/cdrom is the CD-ROM directory you have mounted at step 1 and XX is the version of the ghostscript to be installed, 10 or 50.) b Delete the ghostscript currently installed in your machine by typing in: /mnt/cdrom/linux/gs5.XX>rpm -e --nodeps ghostscript c Install the ghostscript which is supplied in the Lexmark E210 CD-ROM by typing in: /mnt/cdrom/linux/gs5.XX/rpm -ivh ghostscript 5.XX-xx.i386.rpm d When # appears on the screen and the installation completes, the ghostscript is successfully updated. To make sure, type in: /mnt/cdrom/linux/gs5.XX/rpm -q ghostscript If the 'ghostscript-5.XX-xx' message appears, the installation is successfully completed. For details on installing the setup script, refer to the /cdrom/linux/install/readme.txt file. Add the driver to the printer list by typing in: /cdrom/linux/install>install.sh (or) /cdrom/linux/install>./install.sh (if the path of the current working directory is not determined.) A.18 DRIVER AND PRINTER SPECIFICATIONS