Lexmark MS517 Users Guide PDF - Page 144
Timeouts, Notes
View all Lexmark MS517 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
Understanding the printer menus 144 Use To Timeouts Hibernate Timeout Disabled 20 minutes 1 hour 2 hours 3 hours 6 hours 1 day 2 days 3 days 1 week 2 weeks 1 month Set the time before the printer enters Hibernate mode. Note: 3 days is the factory default setting. Timeouts Hibernate Timeout on Connection Hibernate Do Not Hibernate Set the printer to Hibernate mode even if there is an active Ethernet connection. Note: Hibernate is the factory default setting. Timeouts Screen Timeout 15 sec-300 sec Set the idle time before the display automatically returns to Ready state. Note: 30 seconds is the factory default setting. Timeouts Prolong Screen Timeout1 On Off Remain in the same location and reset the Screen Timeout timer instead of returning to the home screen. Note: Off is the factory default setting. Timeouts Print Timeout Disabled 1 sec-255 sec Set the printer to end a print job after it has been idle for the specified amount of time. Notes: • 90 seconds is the factory default setting. • When the timer expires, any partially printed page still in the printer is printed. • Print Timeout is available only when using PCL emulation. Timeouts Wait Timeout Disabled 15 sec-65535 sec Set the time the printer waits to receive data from the host. Notes: • 40 seconds is the factory default setting. • Wait Timeout is available only when the printer is using PostScript emulation. 1 This menu item appears only in touch‑screen printer models. 2 This menu item appears only in non‑touch‑screen printer models.