Lexmark MS517 Users Guide PDF - Page 191

Troubleshooting 191 This error can also be caused by installing a genuine Lexmark cartridge, such as a high yield cartridge, that is not intended to be used in this product. The following error codes indicate that a non‑genuine Lexmark toner cartridge is installed: 32.13 32.16 32.19 32.22 32.25 32.28 32.31 32.34 32.37 For more information, see "Using genuine Lexmark parts and supplies" on page 163. Note: If you do not have a replacement cartridge, then see the "Ordering supplies" section or go to www.lexmark.com. Replace unsupported imaging unit [32.xy] Remove the imaging unit, and then install a supported one to clear the message and continue printing. For more information, see the instruction sheet that came with the supply. This error can also be caused by installing a genuine Lexmark imaging unit, such as a MICR unit, that is not intended to be used in this product. The following error codes indicate that a non‑genuine Lexmark imaging unit is installed: 32.14 32.17 32.20 32.23 32.26 32.29 32.32 32.35 32.38 For more information, see "Using genuine Lexmark parts and supplies" on page 163. Note: If you do not have a replacement imaging unit, then see the "Ordering supplies" section or go to www.lexmark.com. Serial option [x] error [54] Try one or more of the following: • Make sure that the serial cable is properly connected and is the correct one for the serial port. • Make sure that the serial interface parameters (protocol, baud, parity, and data bits) are set correctly on the printer and computer.