Lexmark MS517 Users Guide PDF - Page 61

Using MS510dn, MS517dn, MS610dn, and MS617dn 61 Using Hibernate mode Hibernate is an ultra‑low‑power saving mode. Notes: • Three days is the default amount of time before the printer enters Hibernate mode. • Make sure to wake the printer from Hibernate mode before sending a print job. A hard reset or a long press of the Sleep button wakes the printer from Hibernate mode. • If the printer is in Hibernate mode, then the Embedded Web Server is disabled. 1 From the control panel, navigate to: > Settings > > Settings > > General Settings > 2 Select Press Sleep Button or Press and Hold Sleep Button, and then press . 3 Press Hibernate > . Setting Hibernate Timeout Hibernate Timeout lets you set the amount of time the printer waits after a print job is processed before it goes into a reduced power state. Using the Embedded Web Server 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Settings > General Settings > Timeouts. 3 From the Hibernate Timeout menu, select the number of hours, days, weeks, or months you want for the printer to wait before it goes into a reduced power state. 4 Click Submit. Using the printer control panel 1 From the printer control panel, navigate to: > Settings > > Settings > > General Settings > > Timeouts > > Hibernate Timeout > 2 Select the amount of time the printer waits after a print job is processed before it enters Hibernate mode. 3 Press .