Lexmark MS517 Users Guide PDF - Page 97
Printing a menu settings Printing a network setup
View all Lexmark MS517 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Using MS610de 97 • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Settings > Security > Panel PIN Protect. 3 From the Create User PIN or Create Admin PIN section, enter your PIN. Note: Your can enter up to 16 digits for your PIN. 4 Click Modify. 5 From any menu in the Administrative Menus, Management, or Function Access sections, select User PIN Protected, Admin PIN Protected, or Admin PIN and User PIN Protected. Note: Using Admin PIN, you can still access a menu assigned with User PIN. 6 Click Submit. If you try to access a PIN‑protected menu from the printer control panel, then the printer will require you to enter the PIN. Note: After you enter the last digit of the PIN, make sure to press than three seconds. from the printer control panel for more Printing a menu settings page From the home screen, navigate to: > Reports > Menu Settings Page Printing a network setup page If the printer is attached to a network, then print a network setup page to verify the network connection. This page also provides important information that aids network printing configuration. 1 From the home screen, navigate to: > Reports > Network Setup Page 2 Check the first section of the network setup page, and confirm that the status is Connected. If the status is Not Connected, then the LAN drop may not be active, or the network cable may be malfunctioning. Consult a system support person for a solution, and then print another network setup page. Checking the status of parts and supplies Checking the status of parts and supplies on the printer control panel From the home screen, touch Status/Supplies > View Supplies. Checking the status of parts and supplies from the Embedded Web Server Note: Make sure the computer and the printer are connected to the same network. 1 Open a Web browser, and then type the printer IP address in the address field.