Lexmark MS517 Users Guide PDF - Page 39

Using MS510dn, MS517dn, MS610dn, and MS617dn 39 Loading paper and specialty media The selection and handling of paper and specialty media can affect how reliably documents print. For more information, see "Avoiding jams" on page 172 and "Storing paper" on page 110. Setting the paper size and type 1 From the printer control panel, navigate to: > Settings > > Paper Menu > > Paper Size/Type > 2 Press the up or down arrow button to select the tray or feeder, and then press . 3 Press the up or down arrow button to select the paper size, and then press . 4 Press the up or down arrow button to select the paper type, and then press to change the settings. Configuring Universal paper settings The Universal paper size is a user‑defined setting that lets you print on paper sizes that are not preset in the printer menus. Notes: • The smallest Universal paper size is 6 x 127 mm (3 x 5 inches), and is supported only from the multipurpose feeder. • The largest Universal paper size is 216 x 355.6 mm (8.5 x 14 inches), and is supported from all paper sources. 1 From the printer control panel, navigate to: > Settings > unit of measure > > Paper Menu > > Universal Setup > > Units of Measure > > select a 2 Select Portrait Width or Portrait Height, and then press . 3 Press the left or right arrow button to change the setting, and then press . Using the standard bin and paper stop The standard bin holds up to 150 sheets of 75‑g/m2 (20‑lb) paper. It collects prints facedown. The standard bin includes a paper stop that keeps paper from sliding out the front of the bin as it stacks.