Lexmark MS517 Users Guide PDF - Page 99
Adjusting Sleep mode, Using Hibernate mode, Setting Hibernate Timeout, Submit, Settings
View all Lexmark MS517 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Using MS610de 99 Use On Off 3 Click Submit. To Reduce printer noise. Notes: • Print jobs are processed at a reduced speed. • Printer engine motors do not start until a document is ready to print. There will be a short delay before the first page is printed. Use factory default settings. Note: This setting supports the performance specifications of the printer. Adjusting Sleep mode 1 From the home screen, navigate to: > Settings > General Settings > Timeouts > Sleep Mode 2 In the Sleep Mode field, select the number of minutes the printer is idle before it enters Sleep mode. 3 Apply the changes. Using Hibernate mode Hibernate is an ultra‑low‑power saving mode. Notes: • Three days is the default amount of time before the printer enters Hibernate mode. • Make sure to wake the printer from Hibernate mode before sending a print job. A hard reset or a long press of the Sleep button wakes the printer from Hibernate mode. • If the printer is in Hibernate mode, then the Embedded Web Server is disabled. 1 From the home screen, navigate to: > Settings > General Settings 2 Touch Press Sleep Button or Press and Hold Sleep Button. 3 Touch Hibernate > . Setting Hibernate Timeout Hibernate Timeout lets you set the amount of time the printer waits after a print job is processed before it goes into a reduced power state. Using the Embedded Web Server 1 Open a Web browser, and then type the printer IP address in the address field.