Lexmark Network Printer Device Getting Started - Page 24

• Make sure the network is operating properly. Refer to your network documentation or contact your network administrator. • Make sure the printer software is installed on the computer you are sending the print job from. (page 6) Note: You must install the printer software on each computer that uses the network printer. • Make sure an IP address for your network printer appears in the Network Configuration screen. For help accessing the Network Configuration screen, follow steps 1 through 4 on pages 8 and 9. If there is not an IP address listed for your network printer, see Manually configure the network printer on page 23. • Make sure you have selected the correct printer port for the network printer. For help selecting the network printer port, see page 25. • Restart the computer. • Make sure there is not a problem with the printer itself. a Disconnect the printer from the adapter. b Attach the printer directly to your computer with a USB or parallel cable. If you are able to print when the printer is directly attached, there may be a problem with your network. Refer to your network documentation or contact your network administrator. • Uninstall and then reinstall the printer software. (page 22) If the printer still does not print, refer to your printer documentation for help. Macintosh • Make sure all cables to the printer, adapter, electrical outlet and network connection are secure. (pages 4 through 5) • Make sure all indicator lights are on. (page 5) • Make sure the network is operating properly. Refer to your network documentation or contact your network administrator. • Make sure the printer software is installed on the computer you are sending the print job from. (page 6) Note: You must install the printer software on each computer that uses the network printer. • Make sure your printer is selected in the Chooser (Mac OS 8.6 to 9.2 only). (page 26) • Make sure your printer appears on the Printer List screen in Print Center (Mac OS X version 10.0.3 to 10.1 only). (page 14) • Check the printer status. (page 26) Getting Started 20