Lexmark X6575 User's Guide - Page 190

6 Press . 7 To change the number of times the printer will redial: a Press or repeatedly until Redial Attempts appears. b Press . c Press or repeatedly until the setting you want appears. d Press . 8 To change the length of time between redials: a Press or repeatedly until Redial Time appears. b Press . c Press or repeatedly until the setting you want appears. d Press . Schedule to resend fax at a later time See "Sending a broadcast fax at a scheduled time" on page 115. Failed to Connect These are possible causes and solutions. Try one or more of the following: Use phone line checklist • Resend the fax. There may have been a problem with the quality of the telephone line connection. • Place a test call to the telephone number to which you want to send a fax to make sure that it is working correctly. • If the telephone line is being used by another device, wait until the other device is finished before sending the fax. Make sure the printer detects dial tone • See "Sending a fax while listening to a call (On Hook Dial)" on page 115. • Check the Dial Method setting. 1 Listen for a dial tone. If you hear a dial tone, but the printer hangs up without dialing, this means it did not recognize the dial tone. 2 From the control panel, press Fax Mode. 3 Press . 4 Press or repeatedly until Fax Setup appears. 5 Press . 6 Press or repeatedly until Dialing and Sending appears. 7 Press . 8 Press or repeatedly until Dial Method appears. 9 Press . 10 Press or repeatedly until the method you want appears. 11 Press to save this setting. 190