Lexmark X7500 Setup Guide - Page 21
Installing the printer, lling the printer, operator panel cover, ator panel cover - mfp option
UPC - 734646391306
View all Lexmark X7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Housing Installing the printer operator panel cover Power switch cover Operator panel cover Replacement housing Subassembly Cable Recess Installing the operator panel cover and the power switch cover is optional. It is not necessary for the proper functioning of the MFP. 1 Make sure the printer is unplugged. Pull up on the operator panel to unsnap it, and then gently remove it. 2 Disconnect the cable from the operator panel. Leave the cable attached to the printer. 3 Remove the three screws from the back of the operator panel and separate the housing from the subassembly. Save the screws. 4 Insert the subassembly into the replacement housing and then secure with three screws. 5 Connect the cable to the operator panel. 6 Gently press the operator panel into the recess on the front of the printer until it snaps into place. Complete the hardware setup 13