Lexmark X7500 Setup Guide - Page 9

Your printer supports either an optional high capacity feeder or an optional base cabinet. You need one of these options for your printer to fit properly into the stand. Whether you have a printer that you need to set up, or you already have an installed printer, you need to modify your high capacity feeder or base cabinet. Modifying your high capacity feeder or base cabinet If you haven't set up your printer yet, unpack the high capacity feeder or base cabinet and remove any packing materials. Be sure to remove any foam and tape from inside. Save the carton and packing materials if you need to repack the option later. You need a Phillips screwdriver to modify and install the high capacity feeder. Note: If you prefer not to disassemble the printer, use a 7/32 socket wrench to reach under the base cabinet and remove the stabilizer feet. If you have already set up your printer, you need to disassemble it and remove the high capacity feeder or base cabinet. Refer to "Removing printer parts" on the printer publications CD for information on how to do this. Set up your printer 1