Lexmark X9350 User's Guide - Page 104
Using a PictBridge-enabled digital camera to control printing photos, Memory Card Detected, Photo
UPC - 734646091732
View all Lexmark X9350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Note: Make sure the photo print settings you select match your current printer settings. For information on changing printer photo settings, see "Using Photo and the Photo Card Mode menu" on page 45. 1 Load a stack of photo paper in Tray 1 or one sheet in the small media feeder. Note: Make sure to load the paper with the glossy or printable side facing down. (If you are not sure which side is the printable side, see the instructions that came with the paper. 2 Insert a memory card with a DPOF selection. The message Memory Card Detected appears briefly on the display. 3 From the main menu, make sure Photo is highlighted, and then press . The Photo Card Mode menu appears with View Slideshow highlighted. 4 Press or repeatedly until Print Camera Selections is highlighted. 5 Press . 6 Press to display the DPOF selection you specified. A preview of the print job appears. 7 Press . Using a PictBridge-enabled digital camera to control printing photos You can connect a PictBridge-enabled digital camera to the printer, and use the buttons on the camera to select and print photos. 1 Insert one end of the USB cable into the camera. Note: Use only the USB cable that came with the digital camera. 2 Insert the other end of the cable into the PictBridge port on the front of the printer. MS SD/MMC XD CF/MD PictBridge Warning: Do not touch the USB cable, any network adapter, or the printer in the area shown while actively printing from a PictBridge-enabled digital camera. A loss of data can occur. Also, do not remove the USB cable or network adapter while actively printing from a PictBridge-enabled digital camera. 104