Lexmark XC6153 .Users Guide PDF - Page 240
Step 3, Settings, Print, Quality, Color Saver, Notes, Paper, Tray Configuration, Paper Size/Type
View all Lexmark XC6153 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 240 highlights
Troubleshooting 240 Action Step 3 a Turn off Color Saver. From the control panel, navigate to: Settings > Print > Quality > Color Saver b Print the document. Yes Go to step 4. No The problem is solved. Is the print light? Step 4 Go to step 5. a Depending on your operating system, specify the paper type from the Printing Preferences or Print dialog. Notes: • Make sure that the setting matches the paper loaded. • You can also change the setting on the printer control panel. Navigate to Settings > Paper > Tray Configuration > Paper Size/Type. b Print the document. The problem is solved. Is the print light? Step 5 Check if paper has texture or rough finishes. Go to step 6. Go to step 7. Are you printing on textured or rough paper? Step 6 a Replace textured or rough paper with plain paper. b Print the document. Go to step 7. The problem is solved. Is the print light? Step 7 a Load paper from a fresh package. Note: Paper absorbs moisture due to high humidity. Store paper in its original wrapper until you are ready to use it. b Print the document. Go to step 8. The problem is solved. Is the print light? Step 8 Replace the imaging unit, and then print the document. Contact customer The problem is support. solved. Is the print too light?