Lexmark XC6153 .Users Guide PDF - Page 94
Media Configuration, Universal Setup
View all Lexmark XC6153 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Understanding the printer menus 94 Menu item Description Substitute Size Off Letter/A4 All Listed* Set the printer to substitute a specified paper size if the requested size is not loaded in any paper source. Notes: • Off prompts the user to load the required paper size. • All Listed allows all available substitutions. Configure MP Cassette* Manual First Determine the behavior of the multipurpose feeder. Notes: • Cassette configures the multipurpose feeder as the automatic paper source. • Manual sets the multipurpose feeder only for manual-feed print jobs. • First configures the multipurpose feeder as the primary paper source. Note: An asterisk (*) next to a value indicates the factory default setting. Media Configuration Universal Setup Menu item Description Units of Measure Inches Millimeters Specify the unit of measurement for the universal paper. Note: Inches is the U.S. factory default setting. Millimeters is the international factory default setting. Portrait Width 3-52 inches (8.5*) 76-1321 mm (216*) Set the portrait width of the universal paper. Portrait Height 3-52 inches (14*) 76.2-1321 mm (356*) Set the portrait height of the universal paper. Feed Direction Short Edge* Long Edge Set the printer to pick paper from the short edge or long edge direction. Note: Long Edge appears only when the longest edge is shorter than the maximum width supported. Note: An asterisk (*) next to a value indicates the factory default setting.