Lexmark XC6153 .Users Guide PDF - Page 81
App Configuration, Enable the Lexmark Embedded Solutions LES applications.
View all Lexmark XC6153 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Understanding the printer menus 81 Menu item Description App Configuration LES Applications Off On* Enable the Lexmark Embedded Solutions (LES) applications. Scanner Configuration Scanner Manual Registration Print Quick Test Print a Quick Test target page. Note: Make sure that the margin spacing on the target page is uniform all the way around the target. If it is not, then the printer margins must be reset. Scanner Configuration Scanner Manual Registration Front ADF Registration Rear ADF Registration Flatbed Registration Manually register the flatbed and ADF after replacing the ADF, scanner glass, or controller board. Scanner Configuration Reset Maintenance Counter Reset the counter after replacing the ADF maintenance kit. Scanner Configuration Edge Erase Flatbed Edge Erase (3*) ADF Edge Erase (3*) Set the size, in millimeters, of the no‑print area around an ADF or flatbed scan job. Scanner Configuration ADF Deskew ADF Electronic Deskew (On*) Reduce skewing of documents that are scanned from the ADF. Scanner Configuration Disable Scanner Enabled* Disabled ADF Disabled Disable the scanner when it is not working properly. Scanner Configuration Tiff Byte Order CPU Endianness* Little Endian Big Endian Set the byte order of a TIFF‑formatted scan output. Scanner Configuration Exact Tiff Rows Per Strip On* Off Set the RowsPerStrip tag value of a TIFF‑formatted scan output. Note: An asterisk (*) next to a value indicates the factory default setting.