Lexmark Z601 User's Guide for Mac OS X - Page 39
Setup troubleshooting, Troubleshooting checklist
View all Lexmark Z601 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
4 Setup troubleshooting Troubleshooting checklist Is the power supply firmly attached to your printer and a properly grounded electrical outlet? Are both your printer and computer on? If you are using your printer on a network, make sure your computer is connected to the network, your Lexmark adapter is on, and all indicator lights are on. For more information, refer to the adapter documentation. Is your USB cable securely attached to your printer and to your computer or Lexmark adapter? Is the printer light blinking? If it is, see "Understanding error messages and flashing lights" on page 45. Did you remove the sticker and transparent tape from the backs and bottoms of both print cartridges? Did you install the print cartridges correctly? For help, see "Install the cartridges" on page 33. Is the paper loaded correctly? Make sure you do not push the paper too far into the printer. If the paper feed light is blinking, see "Understanding error messages and flashing lights" on page 45. Did you install the printer software correctly? Open the printer utility by double-clicking the Z600 Series Printer folder on your desktop, and then double-clicking Z600 Series Utility. You can also access the Z600 Series Utility from Printer Services in the Print dialog menu. If the printer folder and the printer utility are not found, relaunch the printer software. For help, see "Installing the printer software" on page 41. Setup troubleshooting 39