LiftMaster LA500 LA500 Manual - Page 35
ACCESSORY FEATURES ON EXPANSION BOARD, Single Button Control, SBC
View all LiftMaster LA500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
ADDITIONAL FEATURES ACCESSORY FEATURES ON EXPANSION BOARD ACCESSORY FEATURES ON EXPANSION BOARD A Open Input (& common) (3-Button Control Station, 4 terminals total) B Close Input (& common) (3-Button Control Station, 4 terminals total) C Stop Input (& common) (3-PB station, 4 terminals total) D Single Button Control, SBC (2 terminals) E Exit Loop Input (2 terminals) F Shadow Loop Input (2 terminals) G Interrupt Loop Input (2 terminals) H AUX Relay #1 I AUX Relay #2 Open command - opens a closed gate. Soft close (maintained switch does not override external safeties and does not reset alarm condition) If maintained, pauses Timer-to-Close at OPEN limit. Opens a closing gate and holds open an open gate. Close command - closes an open gate. Soft close (maintained switch does not override external safeties and does not reset alarm condition) Stop command - stops a moving gate. Hard stop (maintained switch overrides Open and Close commands and resets alarm condition) If maintained, pauses Timer-to-Close at OPEN limit. Overrides an Open or Close command. Gate command sequence - Open, Stop, Close, Stop, ... Soft open (maintained switch does not override external safeties and does not reset alarm condition) Loop wire connection for plug-in loop detector when loop is inside secured area near gate. Open command - opens a closed gate. Soft open (maintained switch does not override external safeties and does not reset alarm condition) If maintained, pauses Timer-to-Close at OPEN limit. Opens a closing gate and holds open an open gate. Loop wire connection for plug-in loop detector when loop is along side gate. - Holds open gate at open - Disregarded at Close limit and during gate motion - Pauses Timer-to-Close at Open Limit Loop wire connection for plug-in loop detector when loop is positioned under gate. - Holds open gate at open - Stops and reverses a closing gate - Pauses Timer-to-Close at Open Limit Normally - open and normally - closed relay contacts to control external devices, Function of relay contact activation determined by AUX Relay #1 option switch settings. (For connection of Class 2, low voltage (