MSI KT4V User Guide - Page 71

IR Pin Select, Parallel Port, Port Mode, EPP Version, Port IRQ, Port DMA, OnChip IDE Controller

Get MSI KT4V - Motherboard - ATX PDF manuals and user guides View all MSI KT4V manuals
Add to My Manuals
Save this manual to your list of manuals

Page 71 highlights

BIOS Setup IR Pin Select Set to IRRX/IRTX when using an internal IR module connected to the IR header. Set to SINB/SOUTB. when connecting an IR adapter to COM B. Parallel Port This field specifies the base I/O port address of the onboard parallel port. Selecting Auto allows AMIBIOS to automatically determine the correct base I/O port address. Settings: Auto, 378, 278, Disabled. Port Mode This item selects the operation mode for the onboard parallel port: ECP, Normal, Bi-Dir or EPP. EPP Version The item selects the EPP version used by the parallel port if the port is set to EPP mode. Settings: 1.7, 1.9. Port IRQ When OnBoard Parallel Port is set to Auto, the item shows Auto indicating that BIOS determines the IRQ for the parallel port automatically. Port DMA This feature needs to be configured only when Parallel Port Mode is set to the ECP mode. When Parallel Port is set to Auto, the field will show Auto indicating that BIOS automatically determines the DMA channel for the parallel port. OnChip IDE Controller This setting controls the onboard IDE controller. Setting options: Disabled, Primary, Secondary, Both. OnBoard LAN This setting controls the onboard LAN controller. Setting options: Disabled, Enabled. OnBoard LAN P.M.E. This feature allows the onboard LAN to be awakened from the power saving modes through any event on PME (Power Management Event). Setting options: Disabled, Enabled. 3-25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
3-25
BIOS Setup
IR Pin Select
Set to
IRRX/IRTX
when using an internal IR module connected to the IR
header.
Set to
SINB/SOUTB.
when connecting an IR adapter to COM B.
Parallel Port
This field specifies the base I/O port address of the onboard parallel port.
Selecting
Auto
allows AMIBIOS to automatically determine the correct base
I/O port address.
Settings:
Auto, 378
,
278
,
Disabled
.
Port Mode
This item selects the operation mode for the onboard parallel port:
ECP
,
Normal
,
Bi-Dir
or
EPP
.
EPP Version
The item selects the EPP version used by the parallel port if the port is set
to
EPP
mode.
Settings:
1.7
,
1.9
.
Port IRQ
When
OnBoard Parallel Port
is set to
Auto
, the item shows
Auto
indicat-
ing that BIOS determines the IRQ for the parallel port automatically.
Port DMA
This feature needs to be configured only when
Parallel Port Mode
is set
to the
ECP
mode.
When Parallel Port is set to
Auto
, the field will show
Auto
indicating that BIOS automatically determines the DMA channel
for the parallel port.
OnChip IDE Controller
This setting controls the onboard IDE controller.
Setting options:
Disabled
,
Primary
,
Secondary, Both
.
OnBoard LAN
This setting controls the onboard LAN controller.
Setting options:
Disabled
,
Enabled
.
OnBoard LAN P.M.E.
This feature allows the onboard LAN to be awakened from the power
saving modes through any event on PME (Power Management Event).
Setting options:
Disabled
,
Enabled.