Maytag MGR5752BDW Use and Care Guide - Page 15

To cancel the Clock display: If you do not want the time of day to display: Press and hold the CANCEL and Clock pads for three seconds. The time of day will disappear from the display When the clock display is canceled, press the Clock pad to briefly display the time of day. Fault Codes BAKE or LOCK may flash rapidly in the display to alert you if there is an error or a problem. If BAKE or LOCK flash in the display, press CANCEL pad. If BAKE or LOCK continue to flash, disconnect power to the appliance. Wait a few minutes, and then reconnect power. If the flashing still continues, disconnect power to the appliance and call an authorized servicer. To restore the Clock display: Press and hold the CANCEL and Clock pads for three seconds. The time of day will reappear in the display. Baking To set Bake: Timer 1. Press the Bake pad. • "BAKE" will flash. The timer can be set from one minute (00:01) up to 99 hours and 59 minutes (99:59). The timer can be used independently of any other oven activity. It can also be set while another oven function is operating. The Timer does not control the oven. It only controls a beeper. To set the Timer: 1. Press the Timer pad. • 0:00 lights in the display. • The colon flashes in the display. 2. Press the More+ or Less- pad until the correct time appears in the display. • 000 will light in the display. 2. Select the oven temperature. The oven temperature can be set from 170° to 550°. Press or press and hold the More+ or Less- pads. • 350° will light when either pad is first pressed. • Press the More+ pad to increase the temperature. • Press the Less- pad to decrease the temperature. 3. Press Bake pad again or wait four seconds. • BAKE will stop flashing and light in the display. • 100° or the actual oven temperature will display. The temperature will rise in 5° increments until the preset temperature is reached. • The colon will continue to flash. 3. Press Timer pad again or wait four seconds. • The colon continues flashing and the time begins counting down. 4. Allow the oven to preheat for 8-15 minutes. • The last minute of the timer countdown will be displayed as seconds. • When the set oven temperature is reached, one long beep will sound. 4. At the end of the set time, one long beep will sound. To cancel the Timer: 1. Press and hold the Timer pad for three seconds. OR 2. Press the Timer pad and set the time to 00:00. • To recall the set temperature during preheat, press the Bake pad. 5. Place food in center of oven, allowing a minimum of two inches between utensil and oven walls. 6. Check cooking progress. Cook longer if needed. 7. When cooking is finished, press CANCEL. Locking the Controls 8. Remove food from the oven. The touchpad controls can be locked for safety, cleaning, or to prevent unwanted use. They will not function when locked. If the oven is currently in use, the controls cannot be locked. The current time of day will remain in the display when the controls are locked. To lock: Press and hold the CANCEL and Cook & Hold pads for three seconds. • LOCK flashes in the display. To unlock: Notes: • To change the oven temperature during cooking, press the Bake pad, then press the More+ or Less- pad until you reach the desired temperature. • To change oven temperature during preheat, press the Bake pad twice, then press the More+ or Lesspad until the desired temperature is displayed. • If you forget to turn off the oven, it will automatically turn off at the end of 12 hours. If you wish to deactivate this feature, see page 17. Press and hold the CANCEL and Cook & Hold pads for three seconds. • LOCK disappears from the display. 14