Motorola V186 User Manual - Page 163
DO/DI FET Module Specifications, or 40 Wire Cable with Terminal Block Holder connector, 26 AWG
View all Motorola V186 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
Appendix A - ACE3600 Specifications DO/DI FET Module Specifications Total Number of I/Os 16 (Option V480); 32 (Option V481) I/O Arrangement Two or four group of 8 I/Os with shared common Each group can be configured as FET DO or dry contact DI Selectable combinations (32 DO/DI): 32 DO/ 8 DI+24 DO/ 16 DI+16 DO/ 24 DI+8 DO/ 32 DI Selectable combinations (16 DO/DI): 16 DO/ 8 DI+8 DO/ 16 DI Counter Inputs The first 20 inputs (of the 32 DI) and all 16 inputs (of the 16 DI) can be used as counter inputs. Counter Input Frequency 0 - 1 KHz, minimum pulse width 500 µS. Note: Although filters are defined in steps of 0.2mSec and 0.05mSec, it is relevant only from 1mSec. Max. DC Input Voltage Max. 30 V DC (relative to input common) Input "ON" Resistance 0-4 kΩ Input "OFF" Resistance ≥50 kΩ Fast Capture Resolution 1 mS (Interrupt upon change of state) Event Time Tagging Resolution 1 mS (Interrupt upon change of state) Input Current Max. 0.3 mA (when the input is shorted) Input Filtering 0 to 50.8 mS (programmable in 0.2 mSec steps), minimum effective filter value - 1mSec Counter Input Filtering 0 to 12.75 mS (programmable in 0.05 mSec steps), minimum effective filter value - 1mSec Output Type MOSFET Output Voltage Range 5-30 V DC (user supplied voltage) DO Frequency Max. 1 KHz (resistive load) DO Output Current Max. 500 mA sink current (resistive load) Output Fail State Configurable output state on CPU fail: On, Off or 'last value' Diagnostic LEDs LED per each input / output status, module error LED User Connection 4 Terminal Blocks (3.5mm pitch), Maximum 18 AWG Cable and TB Holder 20 or 40 Wire Cable with Terminal Block Holder connector, 26 AWG Module Replacement Hot swap replacement- module extraction/insertion under voltage Input/Output Isolation 2.5 kV between input/output and module logic Input Insulation Insulation resistance 100 MΩ @ 500 V DC per IEC60255-5 Operating Voltage 10.8-16 V DC and 3.3 V DC (from the motherboard connector) Power Consumption Refer to Appendix C: ACE3600 Maximum Power Ratings. Dimensions 37 mm W x 225 mm H x 180 mm D (1.5" W x 8.7" H x 7.1" D) Weight Approx. 0.25 Kg (0.55 lb) 159