Motorola V186 User Manual - Page 165
DO Relay Module Specifications, 2A @ 30 V DC, 0.6A @ 60V DC or 0.6A @ 30V AC resistive load
View all Motorola V186 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
Appendix A - ACE3600 Specifications DO Relay Module Specifications 8/16DO Relay EE/ML Modules Total Number of Outputs 8 EE relay outputs (Option V508) 16 EE relay outputs (Option V616) 8 ML relay outputs (Option V314) 16 ML relay outputs (Option V516) Output Arrangement 8 DO : 3 X Form C (SPDT) and 5 X Form A (SPST) 16 DO: 6 X Form C (SPDT) and 10 X Form A (SPST) Contact Voltage Ratings Contact Power Ratings Relay Back Indication DO Frequency Diagnostic LEDs User Connection Cable and TB Holder Fail State All Relays Disable/Enable Module Replacement Output Isolation Insulation Operating Voltage Power Consumption Max. 60 V DC or 30 V AC RMS (42.4 V peak). 2A @ 30 V DC, 0.6A @ 60V DC or 0.6A @ 30V AC (resistive load) Contact position - hardware back indication Max. 10 Hz LED per each output status, module error LED 2 or 4 Terminal Blocks (3.5mm pitch), Maximum 18 AWG 20 or 40 Wire Cable with Terminal Block Holder connector, 26 AWG Configurable relay state on CPU fail: On, Off or 'last value' Selectable per module, controlled from the power supply Hot swap replacement - module extraction/insertion under voltage Between open contacts: 1kV, Between contact and coil: 1.5 kV, Between contact sets: 1.5 kV Insulation resistance 100 MΩ @ 500 V DC per IEC60255-5, Insulation impulse 1.5 kV per IEC60255-5 10.8-16 V DC and 3.3 V DC (from the motherboard connector) Refer to Appendix C: ACE3600 Maximum Power Ratings. Dimensions Weight 37 mm W x 225 mm H x 180 mm D (1.5" W x 8.7" H x 7.1" D) 8 DO : approx. 0.29 Kg (0.64 lb) 16 DO: approx. 0.32 Kg (0.7 lb) 161