Netgear AC3200-Nighthawk User Manual - Page 10
Top View, WPS button, WiFi On/Off button, Router LEDs and buttons, Table 1. - modem
View all Netgear AC3200-Nighthawk manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Nighthawk X6 AC3200 Tri-Band WiFi Router Top View The status LEDs and buttons are located on the top of the router. LEDs WiFi On/Off button WPS button Figure 2. Router LEDs and buttons Table 1. LED and button descriptions LED Power Internet 2.4 GHz Wireless Description • Solid amber. The router is starting. • Blinking amber. The firmware is upgrading, or the Reset button was pressed. • Solid white. The router is ready. • Blinking white. The firmware is corrupted. • Off. Power is not supplied to the router. • Solid white. The Internet connection is ready. • Solid amber. The router detected an Ethernet cable connection to the modem. • Off. No Ethernet cable is connected between the router and the modem. • Solid white. The 2.4 GHz WiFi radio is operating. • Blinking. The router is sending or receiving WiFi traffic. • Off. The 2.4 GHz WiFi radio is off. 5 GHz WiFi 1 5 GHz WiFi 2 • Solid white. The 5 GHz-1 WiFi radio is operating. • Blinking. The router is sending or receiving WiFi traffic. • Off. The 5 GHz-1 WiFi radio is off. • Solid white. The 5 GHz-2 WiFi radio is operating. • Blinking. The router is sending or receiving WiFi traffic. • Off. The 5 GHz-2 WiFi radio is off. Hardware Setup 10