Netgear AC3200-Nighthawk User Manual - Page 42
ADVANCED > Advanced Setup > VLAN/IPTV Setup, Enable VLAN/IPTV Setup
View all Netgear AC3200-Nighthawk manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Nighthawk X6 AC3200 Tri-Band WiFi Router If you add a VLAN tag group to the bridge, packets sent between the device and the router's Internet port are not processed through the router's network address translation (NAT) or firewall. To add a VLAN tag group: 1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Select ADVANCED > Advanced Setup > VLAN/IPTV Setup. The VLAN/IPTV Setup screen displays. 5. Select the Enable VLAN/IPTV Setup check box. 6. Select the By VLAN tag group radio button. 7. Click the Add button. The Add Vlan Rule screen displays. 8. In the Name field, enter a name for the VLAN tag group. The name can be up to 10 characters. 9. In the VLAN ID field, enter a value from 1 to 4094. 10. In the Priority field, enter a value from 0 to 7. 11. Select a Wired Ports check box or a Wireless check box: • If your device is connected to an Ethernet port on the router, select a Wired Ports check box that corresponds to the Ethernet port on the router that the device is connected to. • If your device is connected to your router's WiFi network, select a Wireless check box that corresponds to the router's WiFi network that the device is connected to. Note: You must select at least one Wired Ports or Wireless check box. You can select more than one check box. 12. Click the Add button. The VLAN tag group is added. 13. Click the Apply button. Specify Your Internet Settings 42