Netgear AC3200-Nighthawk User Manual - Page 61
Manage Network Access Control Lists, ADVANCED > Security > Access Control
View all Netgear AC3200-Nighthawk manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Nighthawk X6 AC3200 Tri-Band WiFi Router 4. Select ADVANCED > Security > Access Control. 5. Select the Turn on Access Control check box. You must select this check box before you can specify an access rule and use the Allow and Block buttons. When this check box is cleared, all devices are allowed to connect, even if the device is in the blocked list. 6. Select an access rule: • Allow all new devices to connect. With this setting, if you add a new device, it can access your network. You don't need to enter its MAC address in this screen. NETGEAR recommends that you leave this radio button selected. • Block all new devices from connecting. With this setting, if you add a new device, before it can access your network, you must enter its MAC address for an Ethernet connection and its MAC address for a WiFi connection in the allowed list. The access rule does not affect previously blocked or allowed devices. It applies only to devices joining your network in the future after you apply these settings. 7. To view allowed or blocked devices that are not connected, click the following links: • View list of allowed devices not currently connected to the network • View list of blocked devices not currently connected to the network The list displays. 8. To allow the computer or device you're currently using to continue to access the network, select the check box next to your computer or device, and click the Allow button. 9. Click the Apply button. Your changes take effect. Manage Network Access Control Lists You can use access control to block or allow access to your network. Control Access to the Internet 61