Netgear AC3200-Nighthawk User Manual - Page 122
admin, password, ADVANCED > Setup > LAN Setup, P Address, IP Subnet Mask, RIP Direction
![]() |
View all Netgear AC3200-Nighthawk manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
Nighthawk X6 AC3200 Tri-Band WiFi Router The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Select ADVANCED > Setup > LAN Setup. 5. In the IP Address field, type the IP address. 6. In the IP Subnet Mask, type the subnet mask of the router. The IP address and subnet mask identify which addresses are local to a specific device and which must be reached through a gateway or router. 7. Change the RIP settings. Router Information Protocol (RIP) allows a router to exchange routing information with other routers. a. In the RIP Direction list, select one of the following: • Both. The router broadcasts its routing table periodically and incorporates information that it receives. • Out Only. The router broadcasts its routing table periodically. • In Only. The router incorporates the RIP information that it receives. b. In the RIP Version list, select one of the following: • Disabled. This is the default setting. • RIP-1. This format is universally supported. It is adequate for most networks, unless you have an unusual network setup. • RIP-2. This format carries more information. Both RIP-2B and RIP-2M send the routing data in RIP-2 format. RIP-2B uses subnet broadcasting. RIP-2M uses multicasting. 8. Click the Apply button. Your changes are saved. Network Settings 122
![](/manual_guide/products/netgear-ac3200nighthawk-user-manual-39e14c1/122.png)