Netgear AC3200-Nighthawk User Manual - Page 27
Requirements for Entering IPv6 Addresses, Use Auto Detect for an IPv6 Internet Connection
View all Netgear AC3200-Nighthawk manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Nighthawk X6 AC3200 Tri-Band WiFi Router Your Internet service provider (ISP) can provide this information. For more information about IPv6 Internet connection, see the following sections. - Use Auto Detect for an IPv6 Internet Connection on page 27 - Use Auto Config for an IPv6 Internet Connection on page 29 - Set Up an IPv6 6to4 Tunnel Internet Connection on page 30 - Set Up an IPv6 Pass Through Internet Connection on page 32 - Set Up an IPv6 Fixed Internet Connection on page 32 - Set Up an IPv6 DHCP Internet Connection on page 34 - Set Up an IPv6 PPPoE Internet Connection on page 35 - Set Up an IPv6 6rd Tunnel Internet Connection on page 37 6. Click the Apply button. Your changes take effect. Requirements for Entering IPv6 Addresses IPv6 addresses are denoted by eight groups of hexadecimal quartets that are separated by colons. You can reduce any four-digit group of zeros within an IPv6 address to a single zero or omit it. The following errors invalidate an IPv6 address: • More than eight groups of hexadecimal quartets • More than four hexadecimal characters in a quartet • More than two colons in a row Use Auto Detect for an IPv6 Internet Connection To set up an IPv6 Internet connection through auto detection: 1. Launch an Internet browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Select ADVANCED > Advanced Setup > IPv6. The IPv6 screen displays. 5. In the Internet Connection Type list, select Auto Detect. Specify Your Internet Settings 27