Netgear AC3200-Nighthawk User Manual - Page 25
Service Name if Required, Get Dynamically from ISP
View all Netgear AC3200-Nighthawk manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Nighthawk X6 AC3200 Tri-Band WiFi Router 4. Select Internet. Scroll to view more settings 5. In the Does your Internet connection require a login? section of the screen, select the Yes radio button. The screen adjusts. 6. In the Internet Service Provider list, select the encapsulation method: PPPoE, PPTP, or L2TP. 7. In the Login field, enter the login name your ISP gave you. This login name is often an email address. 8. In the Password field, type the password that you use to log in to your Internet service. 9. If your ISP requires a service name, type it in the Service Name (if Required) field. 10. In the Connection Mode list, select Always On, Dial on Demand, or Manually Connect. 11. To change the number of minutes until the Internet login times out, in the Idle Timeout (In minutes) field, type the number of minutes. This is how long the router keeps the Internet connection active when no one on the network is using the Internet connection. A value of 0 (zero) means never log out. 12. Select an Internet IP Address radio button: • Get Dynamically from ISP. Your ISP uses DHCP to assign your IP address. Your ISP automatically assigns these addresses. • Use Static IP Address. Enter the IP address, IP subnet mask, and the gateway IP address that your ISP assigned. The gateway is the ISP router to which your router connects. Specify Your Internet Settings 25