Netgear EX3110 User Manual

Netgear EX3110 Manual

Netgear EX3110 manual content summary:

  • Netgear EX3110 | User Manual - Page 1
    AC750 WiFi Range Extender User Manual Model EX3110 September 2017 202-11752-01 350 E. Plumeria Drive San Jose, CA 95134 USA
  • Netgear EX3110 | User Manual - Page 2
    through the NETGEAR website. For product updates and web support, visit http://support.netgear.com. Phone (US & Canada only): 1-888-NETGEAR. Phone (Other Countries): Check the list of phone numbers at http://support.netgear.com/general/contact/default.aspx. Trademarks ©NETGEAR, Inc. NETGEAR and the
  • Netgear EX3110 | User Manual - Page 3
    NETGEAR Installation Assistant 11 Find the Best Location 13 Log In to the Extender After Installation 13 Run Smart Setup Installation 13 Password 28 Turn Password Protection Off and On 28 Recover a Forgotten User Name or Password 29 Automatically Adjust for Daylight Saving Time 30 Manually
  • Netgear EX3110 | User Manual - Page 4
    To Its Factory Default Settings 33 Use the Reset Button 33 Log In and Reset the Extender to Factory Settings 33 Update the Extender Firmware 34 Check for New Firmware and Update the Router 34 Manually Upload Firmware to the Extender 35 Chapter 5 FAQs and Troubleshooting FAQs...38 Cannot
  • Netgear EX3110 | User Manual - Page 5
    existing network range and speed, delivering dual-band WiFi. This chapter covers the following topics: • Meet Your Extender • When to Use Your Extender • How the Extender Works Note For more information about the topics covered in this manual, visit the support website at support.netgear.com. 5
  • Netgear EX3110 | User Manual - Page 6
    AC750 WiFi Range Extender Meet Your Extender Before you install your extender, familiarize yourself with its LEDs and buttons. LEDs The following table describes the LEDs. Table 1. LED descriptions LED Power Router Description • Solid green.
  • Netgear EX3110 | User Manual - Page 7
    : • Reset button. Pressing the Reset button for about five seconds resets the extender on or off. When to Use Your Extender NETGEAR recommends that you connect through the extender network only WiFi access point) and a WiFi device outside the range of the WiFi router. The extender performs two main
  • Netgear EX3110 | User Manual - Page 8
    AC750 WiFi Range Extender The extender must do each of these jobs so that both ends of the bridge are in place. Figure 1. Range extender in a home Overview 8
  • Netgear EX3110 | User Manual - Page 9
    Get Started This chapter covers the following topics: • Install the WiFi Extender • Log In to the Extender After Installation • Run Smart Setup Installation 2 9
  • Netgear EX3110 | User Manual - Page 10
    , see Connect with the NETGEAR Installation Assistant on page 11. Connect with WPS Wi-Fi Protected Setup (WPS) lets you join a secure WiFi network without typing the network name and password. For help with the WPS button on your WPS-enabled device, check the instructions or online help that came
  • Netgear EX3110 | User Manual - Page 11
    setup is complete. • If the Device LED is red, your new extender WiFi network does not reach the area with a poor router WiFi signal. You must move your computer or mobile device closer to the extender until the Device LED turns solid green or amber. Connect with the NETGEAR Installation Assistant
  • Netgear EX3110 | User Manual - Page 12
    AC750 WiFi Range Extender To use the NETGEAR installation assistant to connect the extender to your WiFi , your new extender WiFi network reaches the area with a poor router WiFi signal and your network setup is complete. • If the Device LED is red, your new extender WiFi network does not reach
  • Netgear EX3110 | User Manual - Page 13
    WiFi Range Extender Installation You can use Smart Setup to change the extender settings. This is an easy way to connect the extender to a different router or to change the extender WiFi network name (SSID) or WiFi password. To run Smart Setup on page 40. A login page displays. Get Started 13
  • Netgear EX3110 | User Manual - Page 14
    AC750 WiFi Range Extender 3. Enter your admin email and password and click the LOG IN button. The Status page displays. 4. Click the SMART SETUP button. 5. Follow the prompts. Get Started 14
  • Netgear EX3110 | User Manual - Page 15
    Extender Network Settings This chapter covers the following topics: • View Connected Devices • Boost Your Video Streaming with FastLane Technology • View WiFi Settings • Change the WiFi Network Name • Turn Off the SSID Broadcast to Create a Hidden Network • Disable or Enable the WiFi Radios • Change
  • Netgear EX3110 | User Manual - Page 16
    WiFi Range Extender Extender's IP Address on page 40. A login page displays. 3. Enter your admin email and password and click the LOG IN button. The Status that you want to use for gaming and streaming support the 5 GHz band but your WiFi router supports the 2.4 GHz band. To activate FastLane mode:
  • Netgear EX3110 | User Manual - Page 17
    AC750 WiFi Range Extender • If your extender and router use different WiFi network names ( your extender's IP address, see Find Extender's IP Address on page 40. A login page displays. 3. Enter your admin email and password and click the LOG IN button. The Status page displays. 4. If your browser
  • Netgear EX3110 | User Manual - Page 18
    Range page 40. A login page displays. 3. Enter your admin email and password and click the LOG the SSID Broadcast to Create a Hidden Network By default, the extender broadcasts its WiFi signal so that hidden network you must know its SSID and password and manually enter them. To turn off the SSID
  • Netgear EX3110 | User Manual - Page 19
    Range Extender's IP Address on page 40. A login page displays. 3. Enter your admin email and password and click the LOG IN button. The Status SAVE button. Your settings are saved. Disable or Enable the WiFi Radios By default, the extender's WiFi radios broadcast signals in the 2.4 GHz and 5 GHz
  • Netgear EX3110 | User Manual - Page 20
    AC750 WiFi Range Extender Extender's IP Address on page 40. A login page displays. 3. Enter your admin email and password and click the LOG IN button. The to Add a Computer to the Extender's WiFi Network WPS (WiFi Protected Setup) lets you connect a computer or WiFi device to the extender's network
  • Netgear EX3110 | User Manual - Page 21
    Range Extender WPS supports Extender's IP Address on page 40. A login page displays. 3. Enter your admin email and password and click the LOG IN button. The Push Button (recommended) radio button selected. 7. Click the WIFI PROTECTED SETUP (WPS) button. For two minutes, the extender attempts to add
  • Netgear EX3110 | User Manual - Page 22
    AC750 WiFi Range Extender Extender's IP Address on page 40. A login page displays. 3. Enter your admin email and password and click the LOG IN button. The Status device displays onscreen. Deny Access to a Computer or WiFi Device By default, access control is disabled so that it is easy for you to
  • Netgear EX3110 | User Manual - Page 23
    AC750 WiFi Range Extender • If your extender and router use different WiFi network names ( your extender's IP address, see Find Extender's IP Address on page 40. A login page displays. 3. Enter your admin email and password and click the LOG IN button. The Status page displays. 4. If your browser
  • Netgear EX3110 | User Manual - Page 24
    AC750 WiFi Range Extender . Your settings are saved. Change the Extender's Device Name The default name is EX3800. To change the extender's device name: 1. Extender's IP Address on page 40. A login page displays. 3. Enter your admin email and password and click the LOG IN button. The Status
  • Netgear EX3110 | User Manual - Page 25
    .168.1.3). For more information about how to find your extender's IP address, see Find Extender's IP Address on page 40. A login page displays. 3. Enter your admin email and password and click the LOG IN button. The Status page displays. 4. If your browser displays the Menu icon The extender menu
  • Netgear EX3110 | User Manual - Page 26
    AC750 WiFi Range Extender To add a translated MAC address to your router: 1. Log in to your extender's IP address, see Find Extender's IP Address on page 40. A login page displays. 5. Enter your admin email and password and click the LOG IN button. The Status page displays. 6. If your browser
  • Netgear EX3110 | User Manual - Page 27
    • Turn Password Protection Off and On • Recover a Forgotten User Name or Password • Automatically Adjust for Daylight Saving Time • Manually Set the Extender Clock • Back Up and Manage the Extender Configuration • Return the Extender To Its Factory Default Settings • Update the Extender Firmware
  • Netgear EX3110 | User Manual - Page 28
    IP Address on page 40. A login page displays. 3. Enter your admin email and password and click the LOG IN button. Password Protection Off and On NETGEAR recommends that you leave password protection on to help keep your network secure. You can turn password protection off and on. To turn password
  • Netgear EX3110 | User Manual - Page 29
    credentials again. See Return the Extender To Its Factory Default Settings on page 33. 4. Enter the saved answers to your security questions. 5. Click the NEXT button. Your email and password are displayed. 6. Click the BACK button. A login page displays. 7. Log in to the extender. Maintain and
  • Netgear EX3110 | User Manual - Page 30
    WiFi Range Extender Extender's IP Address on page 40. A login page displays. 3. Enter your admin email and password and click the LOG IN button. The Status makes sure that the that the WiFi access schedules are accurate. To manually set the extender clock: 1. Launch a web browser from a computer
  • Netgear EX3110 | User Manual - Page 31
    Range Extender 4. If your browser displays the Menu icon The extender menu displays. , click it. 5. Select Do More > Access Schedule. The Access Schedule page displays. 6. In the Extender Clock section, select the Manual setup, NETGEAR login page displays. 3. Enter your admin email and password
  • Netgear EX3110 | User Manual - Page 32
    AC750 WiFi Range Extender 7. If your browser is not set up to save downloaded files your extender's IP address, see Find Extender's IP Address on page 40. A login page displays. 3. Enter your admin email and password and click the LOG IN button. The Status page displays. 4. If your browser
  • Netgear EX3110 | User Manual - Page 33
    AC750 WiFi Range Extender Return the Extender To Its Factory Default Settings Under some circumstances (for example, if you lose track of the changes that you made to the extender settings), you might want to erase the configuration and reset the extender to factory default settings. To reset the
  • Netgear EX3110 | User Manual - Page 34
    the RESET button. A confirmation pop-up window opens. 7. Confirm your decision. The extender returns to its factory settings and restarts. This process takes about one minute. Update the Extender Firmware You can log in to the extender and check if new firmware is available, or you can manually
  • Netgear EX3110 | User Manual - Page 35
    . Note You might need to unzip the firmware file. The firmware update process takes about two minutes. Manually Upload Firmware to the Extender If you want to upload a specific firmware version, follow these instructions. To manually upload a firmware file to your extender: 1. Launch a web browser
  • Netgear EX3110 | User Manual - Page 36
    Range Extender CAUTION: After you click the UPLOAD button, do not try to go online, turn off the extender, shut down the computer, or do anything else to the extender until it finishes restarting! 9. Click the UPLOAD button. The firmware update starts and the extender restarts. The firmware update
  • Netgear EX3110 | User Manual - Page 37
    FAQs and Troubleshooting This chapter covers the following topics: • FAQs • Cannot Connect to the Extender • Cannot Join a WiFi Network and Receive an Error Message • Cannot Access mywifiext.net • Find Extender's IP Address 5 37
  • Netgear EX3110 | User Manual - Page 38
    security questions that you set up during the initial setup. For more information, see Recover a Forgotten User Name or Password on page 29. To restore factory settings: 1. Use a sharp object such as a pen or paper clip to press and hold the Reset button on the extender for seven seconds until the
  • Netgear EX3110 | User Manual - Page 39
    www.mywifiext.net. Try these troubleshooting tips to connect to www.mywifiext.net: • If you're trying to access www.mywifiext.net for the first time to set up your extender, see Connect with the NETGEAR Installation Assistant on page 11 and follow the instructions. • After you connect your computer
  • Netgear EX3110 | User Manual - Page 40
    NETGEAR router's user manual. To log in to your extender and find your extender's IP address: 1. Launch a web browser from a computer or mobile device that is connected to the router network. 2. Enter http://www.routerlogin.net. A login window opens. 3. Enter the router admin user name and password
  • Netgear EX3110 | User Manual - Page 41
    Factory Settings and Technical Specifications 6 This appendix covers the following topics: • Factory Default Settings • Technical and Environmental Specifications 41
  • Netgear EX3110 | User Manual - Page 42
    AC750 WiFi Range Extender Factory Default Settings To reset the extender to factory default settings, you can use the Reset button on the side panel or you can log in and click the onscreen RESET button. For more information, see Return the Extender To Its Factory Default Settings on page 33. The
  • Netgear EX3110 | User Manual - Page 43
    AC750 WiFi Range Extender Table 3. Technical specifications (Continued) Technical Specifications Environmental Interface • Operating temperature: 32° to 140°F (0° to 40°C) • Operating humidity: 90% maximum relative humidity, noncondensing 802.11ac, 802.11a, 802.11g, 802.11b Factory Settings and
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43

AC750 WiFi Range Extender
User Manual
Model EX3110
September 2017
202-11752-01
350 E. Plumeria Drive
San Jose, CA 95134
USA