Netgear EX3110 User Manual - Page 42
Factory Default Settings, Table 3.Technical specifications
View all Netgear EX3110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
AC750 WiFi Range Extender Factory Default Settings To reset the extender to factory default settings, you can use the Reset button on the side panel or you can log in and click the onscreen RESET button. For more information, see Return the Extender To Its Factory Default Settings on page 33. The following table shows the factory default settings. Table 2. Factory default settings Feature Smart Setup WiFi communication WiFi network name (SSID) Security Transmission speed Country/region Operating mode Data rate in the 2.4 GHz band Data rate in the 5 GHz band DHCP Default Settings Enabled Enabled NETGEAR_EXT Disabled Auto1 Varies by region 802.11a/b/g/n/ac 54/145/300 Mbps 54/145/300/433 Mbps Client enabled 1Maximum WiFi signal rate (IEEE Standard 802.11). Actual throughput can vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead lower actual data throughput rate. Technical and Environmental Specifications The following table shows the technical and environmental specifications. Table 3. Technical specifications Technical Specifications Network protocol and standards compatibility Physical specifications Data and routing protocols: TCP/IP, DHCP server and client, DNS relay, • Dimensions: 72.5 x 72.5 x 64.8 mm (2.85 x 2.85 x 2.55 in.) • Weight: 152 g (0.34 lb) Factory Settings and Technical Specifications 42