Netgear FVS336G FVS336G Reference Manual - Page 30
Other PPPoE, Account Name, Domain Name., Idle Timeout., Valid account name for the PPPoE connection - default login
UPC - 606449052015
View all Netgear FVS336G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual 3. If you clicked Yes, enter the ISP-provided Login and Password information. 4. In the ISP Type options, select the type of ISP connection you use from the three listed options. (By default, "Other (PPPoE)" is selected, as shown below. Figure 2-7 (If your connection is PPPoE or PPTP, your ISP will require an initial login.) 5. If you have installed login software such as WinPoET or Enternet, then your connection type is PPPoE. If your ISP uses PPPoE as a login protocol: Figure 2-8 a. Select Other (PPPoE). b. Configure the following fields: • Account Name. Valid account name for the PPPoE connection • Domain Name. Name of your ISP's domain or your domain name if your ISP has assigned one. In most cases, you may leave this field blank. • Idle Timeout. Select Keep Connected, to keep the connection always on. To logout after the connection is idle for a period of time, click Idle Time and in the timeout field enter the number of minutes to wait before disconnecting. 2-8 Connecting the FVS336G to the Internet v1.0, March 2009