Netgear FVS336G FVS336G Reference Manual - Page 90

ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual • Gateway connection • Connection name • Pre-shared key • Remote and local WAN addresses • Remote LAN IP address and subnet Figure 5-4 2. Select Gateway as your connection type. 3. Create a Connection Name. Enter a descriptive name for the connection. This name used to help you manage the VPN settings; is not supplied to the remote VPN endpoint. 4. Enter a Pre-shared Key. The key must be entered both here and on the remote VPN gateway, or the remote VPN client. This key must be a minimum of 8 characters and should not exceed 49 characters. 5. Choose which WAN port to use as the VPN tunnel end point. Note: If you are using a dual WAN rollover configuration, after completing the wizard, you must manually update the VPN policy to enable VPN rollover. This allows the VPN tunnel to roll over when the WAN Mode is set to Auto Rollover. The wizard will not set up the VPN policy with rollover enabled. 6. Enter the Remote and Local WAN IP Addresses or Internet Names of the gateways which will connect. 5-4 Virtual Private Networking Using IPsec v1.0, March 2009