Netgear FVS336G FVS336G Reference Manual - Page 66
Creating a LAN WAN Inbound Services Rule, Add LAN WAN Inbound Service, Apply, Inbound Services, Action - reset
UPC - 606449052015
View all Netgear FVS336G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual Creating a LAN WAN Inbound Services Rule This Inbound Services Rules table lists all existing rules for inbound traffic. If you have not defined any rules, no rules will be listed. By default, all inbound traffic is blocked. Remember that allowing inbound services opens holes in your firewall. Only enable those ports that are necessary for your network. To create a new inbound service rule in the LAN WAN Rules tab: 1. Click Add under the Inbound Services Table. The Add LAN WAN Inbound Service screen is displayed. Figure 4-3 2. Configure the parameters based on the descriptions in Table 4-2 on page 4-6. 3. Click Apply to save your changes and reset the fields on this screen. The new rule will be listed on the Inbound Services table. Modifying Rules To make changes to an existing outbound or inbound service rule: 1. In the Action column adjacent to the rule, do the following: • Click Edit to make any changes to the rule definition of an existing rule. The Outbound Service or Inbound Service screen is displayed containing the data for the selected rule. • Click Up to move the rule up one position in the table rank. 4-10 Firewall Protection and Content Filtering v1.0, March 2009