Netgear FVS336G FVS336G Reference Manual - Page 82

ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual Setting a Schedule to Block or Allow Specific Traffic Schedules define the timeframes under which firewall rules may be applied. Figure 4-14 Three schedules, Schedule 1, Schedule 2 and Schedule3 can be defined, and any one of these can be selected when defining firewall rules. To invoke rules based on a schedule, follow these steps: 1. Select Security > Schedule to display the Schedule 1 tab page. 2. Check the radio button for All Days or Specific Days. If you chose Specific Days, check the radio button for each day you want the schedule to be in effect. 3. Check the radio button to schedule the time of day: All Day, or Specific Times. If you chose Specific Times, enter the Start Time and End Time fields (Hour, Minute, AM/PM), which will limit access during certain times for the selected days. 4. Click Apply to save your settings to Schedule 1. Repeat these steps to set to a schedule for Schedule 2 and Schedule 3. Configuring a Bandwidth Profile To prevent one user or group from using excessive inbound or outbound bandwidth, you can define a bandwidth profile to set a minimum and maximum bandwidth for an individual or group. You can apply a defined profile in a firewall rule to limit specific protocols or all traffic (see "Using Rules to Block or Allow Specific Kinds of Traffic" on page 4-2). To create a bandwidth profile: 4-26 Firewall Protection and Content Filtering v1.0, March 2009