Netgear GA311 GA311 User Manual - Page 36

NETGEAR 10/100/1000 Mbps Gigabit Ethernet Adapter GA311 User Manual Table 3-3. PCI BIOS Parameters Parameter Setting Bus-Master Enabled Interrupt number Set to any IRQ that does not conflict with another device Latency timer Recommended range is between 20 and 255. This parameter is typically set to 64 • Try inserting the network adapter in another slot. If the new position works, the original slot in your system may be defective. • Replace the failed network adapter with one that is known to work properly. If the second adapter works in the slot where the first one failed, the original adapter is probably defective. • Install the network adapter in another functioning system and run the tests again. If the adapter passed the tests in the new system, the original system may be defective. • Remove all other network adapters from the system and run the tests again. If the adapter passes the tests, the other adapters might be causing the conflict. 3-6 v1.0, February 2007