Netgear GS748AT GS724AT/GS748AT Software Administration Manual - Page 110
CST Port Configuration, Root Path Cost
UPC - 606449059793
View all Netgear GS748AT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
GS700AT Smart Switch Software Administration Manual • Root Port - Displays the port number that offers the lowest cost path from this bridge to the Root Bridge. This field is significant when the bridge is not the Root Bridge. The current root port is zero when the device is not connected to the network. • Root Path Cost - Displays the cost of the path from this bridge to the Root Bridge. The current root path cost is zero when the device is not connected to the network. 2. Enter the Bridge Priority in the provided field. 3. Select Hello Time, Max Age or Forward Delay and enter the value in the provided field. 4. Click APPLY to update the device. CST Port Configuration To configure CST ports on the device: 1. Click Switching > STP > Advanced > CST Port Configuration. The CST Port Configuration screen displays: Figure 4-23 The CST Port Configuration screen contains the following fields: • Interface - Displays the port or LAG for which the STP information is displayed. • STP Status - Select the STP status on the interface. The possible field values are: - Enable - Enable STP on the interface. - Disable - Disable STP on the interface. • Fast Link - Select the Fast Link state on the interface. If Fast Link mode is enabled for a interface, the Port State is automatically placed in the Forwarding state when the port link is up. Fast Link optimizes the STP protocol convergence. The possible field values are: 4-33 v1.0, October 2008 Configuring Switching Settings