Netgear GS748AT GS724AT/GS748AT Software Administration Manual - Page 65
System > LLDP > Advanced, LLDP Port Settings, Interface, Admin Status, Management IP Address
UPC - 606449059793
View all Netgear GS748AT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
GS700AT Smart Switch Software Administration Manual To define LLDP Port Properties: 1. Click System > LLDP > Advanced > LLDP Port Settings. The LLDP Port Settings screen displays: Figure 3-20 The LLDP Port Settings screen contains the following fields: • Interface - Displays the specific interface for which LLDP parameters are defined. • Admin Status - Select the LLDP packet transmitting and receiving status of the interface. The possible field values are: - Tx Only - Enable transmitting LLDP packets only. - Rx Only - Enable receiving LLDP packets only. - Tx & Rx - Enable transmitting and receiving LLDP packets. - Disable - Disable LLDP on the interface. • Management IP Address - Select the management IP address that is advertised from the interface. The possible field values are: - StopAdvertise - Stop advertising the management IP address from the interface. - AutoAdvertise - Advertise the device's current IP address as the management IP address. • Notification - Select the topology change notification status on the interface. - Enable - Enable topology change notification on the interface. This is the default value. Managing System Settings v1.0, October 2008 3-56