Netgear GS748AT GS724AT/GS748AT Software Administration Manual - Page 55
SNMP Notifications, Authentication Notifications, APPLY, System > SNMP > SNMPv3
UPC - 606449059793
View all Netgear GS748AT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
GS700AT Smart Switch Software Administration Manual 2. Select either Enable or Disable in the SNMP Notifications provided field. 3. Select either Enable or Disable in the Authentication Notifications provided field. 4. Click APPLY to update the device. Trap Configuration The SNMPv3 Trap Configuration screen contains information for defining filters that determine whether traps are sent to specific users, and the trap type sent. SNMP notification filters provide the following services: • Identifying Management Trap Targets • Defining Trap Filtering • Selecting Trap Generation Parameters • Providing Access Control Checks To define trap station management: 1. Click System > SNMP > SNMPv3 > Trap Configuration. The SNMPv3 Trap Configuration screen displays: Figure 3-15 The SNMPv3 Trap Configuration screen contains the following fields: • Recipients IP - Enter the IP address to which the traps are sent. • Notification Type - Select the type of notification sent. The possible field values are: - Traps - Traps are sent. Managing System Settings v1.0, October 2008 3-46