Netgear GS748AT GS724AT/GS748AT Software Administration Manual - Page 148
Port Authentication, Port Based Authentication State
UPC - 606449059793
View all Netgear GS748AT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
GS700AT Smart Switch Software Administration Manual - Enable - Enable using a Guest VLAN for unauthorized ports. If a Guest VLAN is enabled, the unauthorized port automatically joins the VLAN selected in the VLAN List field. • Guest VLAN ID - Select the guest VLAN ID from the list of currently defined VLANs. 2. Select Disable or Enable for the Port Based Authentication State in the provided field. 3. If you selected Enable for the Port Based Authentication State, then select the Authentication Method from the list in the provided field. 4. Select Disable or Enable for the Guest VLAN status in the provided field. 5. If you selected Enable for the Guest VLAN field, then select the VLAN ID from the list in the provided field. 6. If you selected Disable for the Port Based Authentication State, select the EAPOL Handling mode in the provided field. 7. Click APPLY to update the device. Port Authentication The Port Authentication screen enables configuring port authentication interface parameters. To configure port-based authentication global properties: 1. Click Security > Port Authentication > Advanced > Port Authentication. The Port Authentication screen displays Figure 6-8 6-12 v1.0, October 2008 Managing Security