Netgear GS748AT GS724AT/GS748AT Software Administration Manual - Page 124
Advanced, Static Addresses
UPC - 606449059793
View all Netgear GS748AT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
GS700AT Smart Switch Software Administration Manual To delete all addresses from the Basic Address Table: 1. Click Switching > Address Table > Basic > Address Table. The Basic Address Table screen displays. 2. Click CLEAR ALL to delete all entries in the address table. Advanced The Address Table Advanced menu contains the following options: • "Static Addresses" • "Dynamic Addresses" • "Address Table" Static Addresses The Static Addresses screen contains a list of static MAC addresses. Static Addresses are added and removed from the Static Addresses screen. To prevent static MAC addresses from being deleted when the device is reset, ensure the port attached to the MAC address is locked. To configure the Static MAC Address table: 1. Click Switching > Address Table > Advanced > Static Addresses. The Static Addresses screen displays: Figure 4-31 The Static Addresses screen contains the following fields: • VLAN ID - Select the VLAN ID number to which the entry refers. • MAC Address - Enter the MAC address to which the entry refers. • Interface - Enter the interface to which the entry refers. 4-47 v1.0, October 2008 Configuring Switching Settings