Netgear GS748AT GS724AT/GS748AT Software Administration Manual - Page 130
CoS Interface Configuration, QoS Mode, Trust Mode, APPLY
UPC - 606449059793
View all Netgear GS748AT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
GS700AT Smart Switch Software Administration Manual The CoS Global Configuration screen contains the following: • QoS Mode - Select whether QoS is enabled or disabled on the device. The possible values are: - Enable - Enable QoS globally. - Disable - Disable QoS globally. • Trust Mode - Select which packet fields to use for classifying packets entering the device. The possible Trust Mode field values are: - CoS - Classify traffic based on the CoS (VPT) tag value. - DSCP - Classify traffic based on the DSCP tag value. 2. Select the QoS Mode and Trust Mode in the provided fields. 3. Click APPLY to update the device. CoS Interface Configuration The CoS Interface Configuration screen contains information for configuring the default CoS value on a selected interface. After CoS has been configured, the device original CoS default settings can be reassigned to the interface in the CoS Interface Configuration screen. To configure CoS interface parameters: 1. Click QoS > CoS > Basic > CoS Interface Configuration. The CoS Interface Configuration screen displays: Figure 5-2 5-3 v1.0, October 2008 Configuring QoS